Results 1 to 4 of 4

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

  1. #1
    Senior Member carolinamtnwoman's Avatar
    Join Date
    May 2007
    Location
    Asheville, Carolina del Norte
    Posts
    4,396

    Active Thermitic Material Discovered in 9/11 WTC Dust

    Active Thermitic Material Discovered in Dust from the 9/11 World Trade Center Catastrophe


    Global Research, April 3, 2009


    Below is the Abstract, Introduction and Conclusions of this important and carefully researched article

    The complete article can be downloaded (pdf)


    Active Thermitic Material Discovered in Dust from the 9/11 World Trade Center Catastrophe

    pp.7-31 (25)

    Authors: Niels H. Harrit, Jeffrey Farrer, Steven E. Jones, Kevin R. Ryan, Frank M. Legge, Daniel Farnsworth, Gregg Roberts, James R. Gourley, Bradley R. Larsen

    The Open Chemical Physics Journal

    Volume 2

    ISSN: 1874-4125

    doi: 10.2174/1874412500902010007

    Complete Article

    http://www.bentham-open.org/pages/conte ... 7TOCPJ.SGM


    Abstract:

    We have discovered distinctive red/gray chips in all the samples we have studied of the dust produced by the destruction of the World Trade Center. Examination of four of these samples, collected from separate sites, is reported in this paper. These red/gray chips show marked similarities in all four samples. One sample was collected by a Manhattan resident about ten minutes after the collapse of the second WTC Tower, two the next day, and a fourth about a week later. The properties of these chips were analyzed using optical microscopy, scanning electron microscopy (SEM), X-ray energy dispersive spectroscopy (XEDS), and differential scanning calorimetry (DSC). The red material contains grains approximately 100 nm across which are largely iron oxide, while aluminum is contained in tiny plate-like structures. Separation of components using methyl ethyl ketone demonstrated that elemental aluminum is present. The iron oxide and aluminum are intimately mixed in the red material. When ignited in a DSC device the chips exhibit large but narrow exotherms occurring at approximately 430 °C, far below the normal ignition temperature for conventional thermite. Numerous iron-rich spheres are clearly observed in the residue following the ignition of these peculiar red/gray chips. The red portion of these chips is found to be an unreacted thermitic material and highly energetic.

    Global Research Editor's Note

    The definition of thermitic material:

    A trademark used for a welding and incendiary mixture of fine aluminum powder with a metallic oxide, usually iron, that when ignited yields an intense heat.

    The American Heritage® Dictionary of the English Language, Fourth Edition copyright ©2000 by Houghton Mifflin Company. Updated in 2003. Published by Houghton Mifflin Company. All rights reserved.

    Thermite is a pyrotechnic composition of a metal powder and a metal oxide, which produces an aluminothermic reaction known as a thermite reaction. (Wikipedia)

    What we are dealing with is the melting/ burning of metal structures.

    “Metals are capable of burning under the right conditions, similarly to the combustion process of wood or gasoline. ... A thermite reaction is a process in which the correct mixture of metallic fuels are combined and ignited. Ignition itself requires extremely high temperatures.â€

  2. #2
    Banned
    Join Date
    Nov 2008
    Location
    Arizona
    Posts
    1,966
    My first thought is " welding rod " ?

  3. #3
    Senior Member Rockfish's Avatar
    Join Date
    Jun 2005
    Location
    From FLA to GA as of 04/01/07
    Posts
    6,640
    Quote Originally Posted by airdale
    My first thought is " welding rod " ?
    Based on these observations, we conclude that the red layer of the red/gray chips we have discovered in the WTC dust is active, unreacted thermitic material, incorporating nanotechnology, and is a highly energetic pyrotechnic or explosive material.
    Spent 20 years in construction, about seven of those years on high rises. I have watched Iron Workers use welding rods which are not explosive. I have also observed Cat Welding take place. It's a process which fuses differnent steel members together. Its' more of a melting thing than it is explosive but not "highly energetic pyrotechnic or explosive material" as stated in the quote above. Let's don't forget that there were steel columns found with angular or diagonal cuts made with a cutting torch in the wreckage of 911. These cuts are often used in tandem with explosives to demo a building.
    Join our efforts to Secure America's Borders and End Illegal Immigration by Joining ALIPAC's E-Mail Alerts network (CLICK HERE)

  4. #4
    Senior Member vmonkey56's Avatar
    Join Date
    Dec 2007
    Location
    Tarheel State
    Posts
    7,134
    Wouldn't it be nice to trust your government? Wouldn't it be nice to trust world history?
    Join our efforts to Secure America's Borders and End Illegal Immigration by Joining ALIPAC's E-Mail Alerts network (CLICK HERE)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •